14.3.2 Bus Drivers and Hybrid Drivers

Bus drivers and hybrid drivers that implement the Driver Health Protocol must verify that ControllerHandle and ChildHandle represent a device that the driver is currently managing. The example below shows the steps required to check these parameters and also retrieve the private context data structure. If these checks pass, the health status is returned. In this specific example, the driver opens the PCI I/O Protocol in its Driver Binding Start() function.
This is why gEfiPciIoProtocolGuid is used in the call to the EDK II Library UefiLib function EfiTestManagedDevice() that checks to see if the UEFI Drivers providing this Repair() service are currently managing ControllerHandle. If the private context structure is required, typically the UEFI Boot Service OpenProtocol() is used to open one of the UEFI Driver produced protocols on ControllerHandle and then uses a CR() based macro to retrieve a pointer to the private context structure.
If diagnostics are being run on ChildHandle, a produced protocol on ChildHandle can be opened. This example also calls ProgressNotification from 10% to 100% at 10% increments for the bus controller and from 1% to 100%, at 1% increments, for the child controller.
Note: If ChildHandle is NULL, a request is made to run diagnostics on the bus controller. If ChildHandle is not NULL, a request is made to run diagnostics on a UEFI Driver managed child controller.
Example 156-Repair() for a Bus Driver or Hybrid Driver
#include <Uefi.h>
#include <Protocol/DriverHealth.h>
#include <Protocol/PciIo.h>
#include <Library/BaseMemoryLib.h>
#include <Library/UefiLib.h>
​
EFI_STATUS EFIAPI
AbcRepair (
  IN EFI_DRIVER_HEALTH_PROTOCOL                *This,
  IN EFI_HANDLE                                ControllerHandle,
  IN EFI_HANDLE                                ChildHandle,           OPTIONAL
  IN EFI_DRIVER_HEALTH_REPAIR_PROGRESS_NOTIFY  ProgressNotification   OPTIONAL
  )
{
  EFI_STATUS  Status;
  UINTN       Index;
​
  //
  // Make sure this driver is currently managing ControllerHandle
  //
  Status = EfiTestManagedDevice (
             ControllerHandle,
             gAbcDriverBinding.DriverBindingHandle,
             &gEfiPciIoProtocolGuid
             );
  if (EFI_ERROR (Status)) {
    return Status;
  }
​
  //
  // If ChildHandle is not NULL, then make sure this driver produced ChildHandle
  //
  if (ChildHandle != NULL) {
    Status = EfiTestChildHandle (
               ControllerHandle,
               ChildHandle,
               &gEfiPciIoProtocolGuid
               );
    if (EFI_ERROR (Status)) {
      return Status;
    }
  }
​
  if (ChildHandle == NULL) {
    //
    // Repair ControllerHandle
    //
    for (Index = 0;
         Index < 10; Index++) {
      //
      // Perform 10% of the work required to repair ControllerHandle
      //
      if (ProgressNotification != NULL) {
        ProgressNotification (Index, 10);
      }
    }
  } else {
    //
    // Repair ChildHandle
    //
    for (Index = 0;
         Index < 100; Index++) {
      //
      // Perform 1% of the work required to repair ChildHandle
      //
      if (ProgressNotification != NULL) {
        ProgressNotification (Index, 100);
      }
    }
  }
​
  return EFI_SUCCESS;
}
14.3.1 Device Drivers
15 Driver Family Override Protocol
Last modified 2yr ago