5.9 Test Point Results

Test Point
Test Subject
Test Overview
Reporting Mechanism
TestPoint EndOfPeiMtrr Functional ()
MTRR after EndOfPei
Confirm MTRR settings. Example:
Dump result to serial log. Set ADAPTER_INFO_ PLATFORM_TEST_ POINT_STRUCT
TestPoint EndOfPei SystemResource Functional ()
Resource HOB SMRAM HOB
SMRAM No system resource overlap
Dump result to serial log. Set ADAPTER_INFO_ PLATFORM_TEST_ POINT_STRUCT
TestPoint EndOfPei PciBusMaster Disabled ()
PCI device BME
Check if BME is cleared
Dump result to serial log. Set ADAPTER_INFO_ PLATFORM_TEST_ POINT_STRUCT
TestPoint PciEnumerationDone PciResource Allocated ()
PCI device resource
Check if all PCI devices have been assigned proper resources.
Dump PCI resource assignment. Set ADAPTER_INFO_ PLATFORM_TEST_ POINT_STRUCT
TestPoint PciEnumerationDone PciBusMaster Disabled ()
PCI device BME
Check if BME is cleared
Dump result to serial log. Set ADAPTER_INFO_ PLATFORM_TEST_ POINT_STRUCT
TestPoint EndOfDxe NoThirdParty PciOptionRom ()
3rd party PCI option ROMs
Check if any 3rd party PCI option ROMs have been dispatched before EndOfDxe.
Dump LoadedImage. Set ADAPTER_INFO_ PLATFORM_TEST_ POINT_STRUCT
TestPoint ReadyToBoot UefiMemoryAttribute TableFunctional ()
UEFI memory attribute table
Table is reported. Image code and data is consistent with the table.
Dump UEFI Table and UEFI Image Info. Set ADAPTER_INFO_ PLATFORM_TEST_ POINT_STRUCT
TestPoint ReadyToBoot MemoryTypeInformation Functional ()
Memory type information
Inspect and verify memory type information is correct. Confirm no fragmentation exists in the ACPI/Reserved/Runtime memory regions.
Dump the memory type information settings to the debug log. Set ADAPTER_INFO_ PLATFORM_TEST_ POINT_STRUCT
TestPoint ReadyToBoot UefiConsoleVariable Functional ()
Console
Inspect and verify console variable information is correct.
Dump the variable information to the serial log Set ADAPTER_INFO_ PLATFORM_TEST_ POINT_STRUCT
TestPoint ReadyToBoot UefiBootVariable Functional ()
Boot Option
Inspect and verify boot option information is correct.
Dump the variable information to the serial log Set ADAPTER_INFO_ PLATFORM_TEST_ POINT_STRUCT

Table 38 Stage III Test Point Results